Tubes, domes, RIC receivers, earhooks & filters for Phonak hearing aids

If you're not sure which tubes or domes you need, please don't guess as you're likely to be wrong! Each range of tubes and domes has different fittings and different acoustic properties and your hearing aid will have been specifically set up for use with a particular type. Please refer all questions as to suitability to your hearing aid advisor/clinic.

Due to hygiene reasons, we are unable to accept tubes and dome returned for credit.

Phonak hearing aid care guide

Phonak Hearing Aid Fit'nGo Micro Tubes
Phonak hearing aid Fit'nGo Micro tubes have a push fitting. They are marked at the dome end with a number followed by a B indicating the size in red (for right) or blue (for left).

Phonak Hearing Aid SlimTube HE
Phonak hearing aid HE SlimTubes have a 'male' screw fitting into the hearing aid. They are marked at the dome end with a number indicating the size in red (for right) or blue (for left). Compatible with Phonak Roger Focus (first generation)

Phonak Hearing Aid SlimTubes
Phonak hearing aid SlimTubes are for use with Phonak BTE hearing aids and have a 'female' screw fitting onto the hearing aid.

Phonak Hearing Aid Power SlimTubes
Phonak Power SlimTubes have a 'female' thread fitting onto the hearing aid. The thread is slightly smaller than on a Power SlimTube II and does not have a slot across the hearing aid end.

Phonak Hearing Aid Power SlimTube II
Phonak Power SlimTubes have a 'female' thread fitting onto the hearing aid. The thread is slightly larger than a Power SlimTube and has a cross slot for a tamperproof pin if required.

Phonak hearing aid SlimTubes SDS 4.0
Phonak hearing aid SDS 4.0 SlimTubes for Phonak Marvel, Paradise, Nova & Focus II hearing aids

Domes for Phonak Fit'nGo, SlimTubes and RIC receivers
These domes are for use with Phonak's range of hearing aid tubes and RIC receiver earpieces. The Phonak advice is to clean domes daily and replace monthly.

Phonak Audeo Marvel and Paradise SDS 4.0 Domes
The SDS 4.0 range of Phonak domes are for Phonak hearing aids on the Marvel, Nova & Paradise technology platform.

Phonak RIC hearing aid receiver earpieces
On the housing of Phonak RIC earpieces there is coloured labelling - blue for left and red for right. The length or size is shown by a number and the power by xS for standard and xP for power

Phonak Audeo M & P (Marvel / Paradise) SDS 4.0 Receivers
Phonak RIC receivers - Standard Receiver 4.0, Medium Receiver 4.0 and Power Receiver 4.0 - and fitting accessories such as wax guards, for Audeo M or P hearing aids using the Marvel / Paradise platform

Phonak hearing aid earhooks - HE7, HE9, HE10 and HE11
Hearing aid earhooks are easily changed and should be replaced if they become cracked or discoloured.

Phonak hearing aid wax filters and wind & weather protectors
Hearing aid wax and microphone wind & weather protectors should be replaced on a regular basis. Don't wait until they look blocked, that's already too late as the performance and sound quality of your hearing aid will already have been degraded.